In many fields such as industrial protection and building waterproofing, polyurea materials have been widely used for their excellent performance advantages. In order to give full play to the characteristics of polyurea materials, a high-performance spraying equipment is crucial, and the CNMC-A25 polyurea sprayer is such a high-profile product.

1. Powerful performance parameters

The CNMC-A25 polyurea sprayer has excellent performance in power configuration, it adopts pneumatic drive, and uses stable and reliable compressed air as the power source, which not only enables the equipment to adapt to a variety of complex working environments, but also shows good stability during operation. Compared with traditional air spraying, airless spraying can allow the paint to be sprayed directly under high pressure, avoiding problems such as bubbles caused by mixed air, so that the coating is more uniform and dense.

From the specific parameters, the maximum working pressure of the sprayer can reach 20Mpa, such a high pressure can ensure that the polyurea material is vigorously sprayed on the construction surface, even if some materials with rough surfaces or special requirements, can also ensure the full adhesion of the paint. In terms of heating power, it has a strong heating capacity of 12kw, and there are 3kw heaters on both sides of material A and B, which can efficiently heat the polyurea material, so that it can maintain good fluidity during the spraying process, ensure uniform mixing of materials and stable spraying effect. This precise heating control helps to improve the reactivity and curing of polyurea materials, improving the quality of the final coating.

The chemical output of the equipment ranges from 2 to 12 kg/min, allowing the user to flexibly adjust the amount of material ejected according to the actual application needs. Whether it's fast construction of large areas or fine processing of details, this adjustable output can meet the requirements. Moreover, the output ratio of A and B materials is strictly controlled at 1:1, which ensures that the two components can be fully mixed to form a stable polyurea coating.

  2. Excellent applicability

The CNMC - A25 polyurea sprayer has its own unique characteristics that make it a great fit for a wide range of applications. In tunnel and subway engineering, it can be used for the construction of waterproof, anti-corrosion coatings. After the construction of CNMC-A25 spraying machine, it can form a continuous and seamless protective coating on the wall, ground and various structural surfaces of tunnels and subways, effectively resisting groundwater erosion, chemical corrosion and mechanical wear, and greatly extending the service life of engineering structures.

Subgrade waterproofing is also one of its important application scenarios. In the construction of transportation infrastructure such as highways and railways, the waterproofing treatment of roadbed is directly related to the stability and durability of the road. CNMC-A25 polyurea spraying machine can quickly and efficiently spray polyurea waterproof layer on the surface of the roadbed, prevent rainwater from penetrating into the subgrade, avoid subgrade settlement and collapse caused by water accumulation, and provide a strong guarantee for the safe and stable operation of traffic roads.

In the field of foam film and television props, the spraying machine also plays an important role. Polyurea material has good flexibility and abrasion resistance, and can be sprayed on the surface of foam props by CNMC-A25, which can enhance the strength of the props and make them not easy to be damaged, and at the same time, it can also give the props a unique texture and appearance effect, meeting the diverse needs of props for film and television shooting.

For exterior wall insulation projects, polyurea materials not only have certain thermal insulation properties, but also have strong adhesion to the wall. The CNMC - A25 sprayer ensures that the polyurea material is evenly covered on the surface of the façade, creating a strong insulation, while also playing a decorative and protective role in the wall, improving the overall performance and aesthetics of the building.

3. Reliable quality assurance

The company has rich experience in the field of spraying equipment manufacturing. CNMC-A25 polyurea spraying machine has passed CE, ISO9001:2008, QS, GMP and other authoritative certifications, which fully proves that it has reached internationally recognized standards in terms of product quality, safety performance, production management, etc. From material selection to manufacturing process, every link is strictly controlled to ensure the stability and durability of the equipment.

With a weight of 150kg, the equipment is structurally robust and portable, allowing it to be easily transferred between different construction sites. Its overall size is 750 * 540 * 1150 mm, and its compact design makes it not take up too much space and is easy to place and operate on the construction site. In addition, the equipment provides a one-year free maintenance period, during which the manufacturer will provide users with professional technical support and maintenance services to solve various problems encountered by users in the process of use, so that users have no worries.

To sum up, the CNMC-A25 polyurea spraying machine has become an ideal choice for polyurea spraying construction with its strong performance, wide applicability and reliable quality, providing an efficient and high-quality solution for engineering construction and product manufacturing in many industries. Whether it is large-scale infrastructure construction or small-scale creative product production, it can play a key role in the application of polyurea materials, helping various industries to improve engineering quality and product quality.